 | Bottle 300ml | £8.25 |  | |
| Bottle 1 Litre | £15.00 | | |
| Sachet 100ml | £3.50 | |
Wash-in waterproofing for wet weather clothing. Adds water-repellency and revives breathability for fabrics without wicking liners.
- Adds / renews water repellency and revives breathability
- Prolongs the life of gear and optimises outdoor performance
- Easy to apply - can be used in a washing machine, no tumble drying required
- Will not affect cosmetic appearance
- Water-based - environmentally friendly, biodegradable, non flammable, non hazardous
- Does not contain fluorocarbons
- Guaranteed performance for 4 years from manufacture
- Recommended uses:
- Clothing with drop liners
- Microporous coatings
- Gore-Tex/SympaTex /eVENT/Triple-Point Ceramic
- Microfibre fabrics
- Breathable laminates
How to Apply
For best results remove all non-washable parts and always clean item(s) first with Nikwax Tech Wash in a separate wash cycle. No need to dry item(s) before waterproofing. Shake well before use. Follow care label instructions.
Machine Wash
- Remove all detergent build-up from the detergent dispenser
- Place maximum of 2 clean garments in washing machine
- Use 2 full caps (100ml) per garment
- Run 30° synthetic cycle and slow spin
Do not machine wash garments if taped seams have become dislodged.*
Hand Wash (use gloves)
- Immerse 1 clean garment in 6L of hand-hot water in a bowl or sink
- Add 1 full cap (50ml) of TX.Direct
- Agitate to mix, leave to soak for 5-10 minutes, then agitate thoroughly
- Rinse with cold water until water runs clear
Drying
- Air dry or tumble dry on a low setting if care label allows
To maintain waterproofing always wash with Nikwax Tech Wash. Do not use detergents.
*Faulty taped seams sometimes become detached on old or worn garments. They can be re-stuck using a proprietary clear glue after waterproofing and drying.
